home *** CD-ROM | disk | FTP | other *** search
-
- ---------- OS/2 Problem Report Form ----------
-
- <<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
- << THIS SUPPORT IS AVAILABLE FOR U.S. CUSTOMERS ONLY >>
- <<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-
-
- CONTACT PERSON: __________________________________
-
- REGISTRATION NUMBER: ______________________
-
- PHONE NUMBER: (___) ___-____ x____ Phone number where you can be
- FAX NUMBER: (___) ___-____ x____ contacted between 8-5, M-F.
-
- Note: Support will normally be handled electronically through
- CompuServe mail. IBM may contact you via telephone if it
- appears it will expedite resolution to the problem.
-
- Would you rather be contacted by phone? Y _ N _
-
-
- Customers should use this form to report a suspected OS/2 DEFECT
- to IBM support on Compuserve.
-
- If you have How-to or other questions about OS/2, please refer to
- these sources:
-
- - The OS/2 on-line help and README.
- - If you have a CompuServe id, you may submit an item to the
- appropriate section within the forums under IBMOS2 (GO IBMOS2).
- - Many bulletin board systems contain user forums where OS/2 users
- share information and ideas on OS/2.
-
- Please provide as much information as possible on your problem. Feel
- free to add additional space, or remove sections of the form that are
- not relevant to your problem.
-
- ************************************************************
- ************************************************************
-
- ONE LINE DESCRIPTION OF THE OS/2 PROBLEM:
- ______________________________________________________________________
-
- DETAILED PROBLEM DESCRIPTION - If possible, provide a step-by-step
- recreation scenario. Also, please include any fixes or work arounds
- you may have already tried:
- ______________________________________________________________________
- ______________________________________________________________________
- ______________________________________________________________________
- ______________________________________________________________________
- ______________________________________________________________________
-
- Enter any error messages that occur: _________________________________
- ______________________________________________________________________
-
- Select the appropriate answers by placing an "X" in the space
- indicated.
- Can you recreate the problem? Y _ N _
- Has the problem occurred on more than one system? Y _ N _
-
- OS/2 OPERATING SYSTEM SOFTWARE CONFIGURATION:
- OS/2 Version........: _______
- CSD Level...........: _______
- Revision Level......: _______
-
- NOTE - Use the SYSLEVEL command from the OS/2 window to determine
- CSD level.
- Use the VER /REV command from the DOS window to determine
- revision level.
-
- HARDWARE CONFIGURATION (provide as much as possible):
- Brand / model of PC.: _______________________________________________
- Microprocessor
- brand.............: Intel _ Other (specify) ______________________
- type..............: 286 _ 386sx _ 386dx _ 486sx _ 486dx _
- speed.............: __ MHz
- Total RAM ..........: __ MB
-
- OS/2 is setup as....: Boot Manager _ Dual Boot _ Stand-Alone _
-
- Disk drive (repeat this section for every physical disk drive)
- brand.............: ________________________
- model #...........: _____________
- type (interface)..: IDE _ ESDI _ SCSI _ MFM _ RLL _ Unknown _
- total size........: _____________
- partitions........: _______________________________________________
- _______________________________________________
- (please include drive letter, size, and format)
-
- Manufacturer and model # of
- Disk controller...: ______________________
- System BIOS.......: ______________________
- Video adapter.....: ______________________
- Display...........: ______________________
-
- Video Ram...........: _____Kb
- Video Type..........: EGA _ VGA _ SVGA _ XGA _ 8514 _
- Drive A: media size.: 3 1/2" _ 5 1/4" _
- Drive B: media size.: 3 1/2" _ 5 1/4" _
- Other adapters......: ________________________________________________
- ________________________________________________
-
- Is your PC connected to a network? Y _ N _
-
- If yes, please fill out the relevant network software questions listed
- below the trap information, even if you feel that your network is not
- at fault.
-
-
- TRAP INFORMATION - If a TRAP occurs and results in the 16 bit trap
- display similar to the following, enter any of the register values
- that you recorded:
-
- SESSION TITLE: ________________________________
- TRAP ____
- AX= ____ BX= ____ CX= ____ DX= ____ BP= ____
- SI= ____ DI= ____ DS= ____ ES= ____ FLG= ____
- CS= ____ IP= ____ SS= ____ SP= ____ MSW= ____
- CSLIM= ____ SSLIM= ____ DSLIM= ____ ESLIM= ____
- CSACC= __ SSACC= __ DSACC= __ ESACC= __
- ERRCD= ____ ERLIM= ____ ERACC= __
- ______________________________________________________________________
- ______________________________________________________________________
- ______________________________________________________________________
-
- If a TRAP occurs and results in the 32 bit trap display similar to the
- following, enter any of the register values that you recorded:
-
- TRAP ____ ERRCD= ____ ERACC= ____ ERLIM= ________
- EAX= ________ EBX= ________ ECX= ________ EDX= ________
- ESI= ________ EDI= ________ EBP= ________ FLG= ________
- CS:EIP= ____ : ________ CSACC= ____ CSLIM= ________
- SS:ESP= ____ : ________ SSACC= ____ SSLIM= ________
- DS= ____ DSACC= ____ DSLIM= ________ CR0= ________
- ES= ____ ESACC= ____ ESLIM= ________ CR2= ________
- FS= ____ FSACC= ____ FSLIM= ________
- GS= ____ GSACC= ____ GSLIM= ________
- THE SYSTEM DETECTED AN INTERNAL PROCESSING
- ERROR AT LOCATION ## ____ : ________ - ____ : ________
- _____ , ____
- ________
- INTERNAL REVISION _ . ___ DATE: __/__/__
-
-
- PRINTER - If this is a printer problem, please provide the following:
- Printer Vendor: __________________ Model ....: ________________
- Driver Name ..: __________________ Port Used : ________________
- Printer is attached to: Local _ LAN Server _ Host _
-
- COMMUNICATIONS MANAGER - If this is a problem with Communications
- Manager, please provide answers in this section:
- OS/2 Extended Services ............: _ CSD Level: _______
- OS/2 EE Communications Manager 1.3 : _ CSD Level: _______
- Describe your Communications Manager configuration (DFT, T-R, etc):
- ________________________________________________________ ________
- ________________________________________________________ ________
-
- LOCAL AREA NETWORK - If this is a local area network problem, please
- enter information about the LAN involved.
-
- LAN SERVER: OS/2 LAN Server Version 1.3 : _ CSD Level: ________
- OS/2 LAN Server 2.0 Entry ..: _ CSD Level: ________
- OS/2 LAN Server 2.0 Advanced: _ CSD Level: ________
- OS/2 LAN Server 3.0 Entry ..: _ CSD Level: ________
- OS/2 LAN Server 3.0 Advanced: _ CSD Level: ________
-
- LAN REQUESTER:
- LAN Server 3.0 Requester....: _ CSD Level: ________
- LAN Server 2.0 Requester....: _ CSD Level: ________
- OS/2 1.3 Requester..........: _ CSD Level: ________
-
- DOS LAN REQUESTER
- LS 3.0 Requester ...........: _ CSD Level: ________
- LS 2.0 Requester ...........: _ CSD Level: ________
- OS/2 1.3 Requester .........: _ CSD Level: ________
- DOS Version: ____ DOS Vendor: _________________
-
- Is the failing system a Domain Controller? Y _ N _
- Is the failing system an additional server? Y _ N _
-
- DATABASE MANAGER - If this is an OS/2 DATABASE MANAGER problem, please
- enter information about the DataBase Manager problem below.
-
- SQL Error Code .......: ________
- Secondary Return Code : ________
- Error occurs when database is being accessed as:
- Stand Alone ......: Y _ N _
- Requester (Client): Y _ N _
- Database Server ..: Y _ N _
- Using RDS ........: Y _ N _
- Using LAN ........: Y _ N _
- If the error is occurring at a requester, can the problem be recreated
- at the server? .....: Y _ N _
- Error occurs in which application?
- Query Manager.....: _
- LI ...............: _ (Command Line Interface)
- User Application..: _
- If a trap has occurred, provide the SQLABEND results:
- ________________________________________________________ _________
- ________________________________________________________ _________
- ________________________________________________________ _________
-
- PLEASE REVIEW ALL OF THIS PROBLEM REPORT BEFORE SENDING. When you are
- ready to send this OS/2 Problem Report, send the form via CISMAIL
- to ---
-
- Base problems - Base Support, 76711,610
- ES/LS problems - ES/LS Support, 76711,611
- (ES = IBM Extended Services, LS = IBM LAN Server)
-